MPI Equipment

101″ BUCKET FOR CAT 950A - $3,500

• Smooth Edge
• Oversize
• With Pins
• Approximately 101″ Inside
• Very Good Condition

110″ BUCKET FOR CAT 980G - $5,500

• Narrow
• Approximately 110″ Inside
• Good Condition

116″ GP BUCKET FOR CAT 966C - $4,000

• 116″ Wide
• 4-Yard Bucket
• Smooth Edge
• Bolt-On Edges
• Good Condition

18″ WB BUCKET FOR CAT 307 - $900

•  Near New Condition
• 3 teeth
• Heavy Duty

1976 CAT 225 - $12,500

• 36″ Bucket
• Hydraulic Thumb
• CAT 3208 Diesel
• Heater
• Approx. 53,000 lbs.
• Hammer Available
• Local Trade-In
• Just Off Job

1976 CAT 637D SCRAPER - $45,000

• Push Pull (Have Front Bail)
• 3408/3306
• Good 37.25 x 35 Tires
• Cab
• Very little use in the last 10 years

1976 CAT D8K - $52,500

• OROPS
• U-Dozer (Removed for transport)
• Ripper
• Spacer Plate
• Low Hours on Frame-Up Rebuild by CAT

1980 CAT 824C - $39,500

• 3406 Cat
• OROPS
• Straight Blade w/Tilt
• Runs and Shifts Well

1980 CAT 825C PADFOOT ROLLER - $60,000

• 60-70% Feet
• Very Good Condition
• Just Off Job

1983 CLARK C500Y300D FORKLIFT - $26,500

• 25,000 lbs.
• 13′ Mask
• 8′ Forks
• Side Shift
• Fork Positioners
• Cummins Power
• Excellent Tires

1984 CAT 623B - $29,500

• 8,000 +/- Gallon Drop Tank
• Good Tires
• Good Condition

1985 JD 450E LT - $16,000

• 6-Way Dozer
• Winch
• Rock Guards
• Screens
• Runs & Shifts Well
• 7,200 Hours
• Good Unit!

1988 CAT 623E - $45,000

• CAT 3406
• Very Good 29.5×29 Firestone 28-Ply Tires
• Good Chains and Flights
• Cushion Neck
• AC
• Runs Very Well

1989 FORD F250 XLT SERVICE TRUCK - $2,000

• Reading Body
• Center Hoist w/Electric Motor
• Small 110v Air Compressor
• Vice
•  235/85R/16 Tires
• Powerstroke
• Automatic Transmission
• Recent Overhaul
• New Radiator

1990 CAT 966E - Call

• GP Bucket
• AC
• ROPS
• Excellent 26.5 L5 Tires
• 21,018 Hours
• 99Y070XX

1992 HITACHI EX200LC - $25,000

• Destec Hydraulic Thumb
• 42″ QC Bucket
• Isuzu Diesel
• Cat Walks
• Very Good Undercarriage
• Daily Worker

1997 Johnston V4000SP - $14,000

• Perkins Diesel
• A/T
• Ex-Government Unit
• 6,457 Hours
• 64,000 Miles
• Good Condition
• Just Off Job

1997 Komatsu CD60R - $55,000

• 360 Degree Dump
• 4 in Stock:  2 w/Steel Tracks and 2 w/Rubber Tracks

1998 GMC C7500 WATER TRUCK - $15,500

• 2,000 +/- Gallon Valew Tank
• Front, Rear & Side Sprays
• 185 hp CAT
• 6 Speed Transmission
• 11R22.5 Tires
• Air Brakes

1999 CHAMPION 780A SERIES V - $69,500

• TopCon Laser System 4 w/Tracker Jack Assembly
• Ripper
• Push Block
• 16′ Mold Board

1999 JD 644H - $65,000

• 4.25-Yard GP Bucket AND Shop-Built Roll-Out Bucket
• JRB Quick Change
• 3rd Valve
• 23.5×25 Tires
• 7,223 Hours
• 39,000 +/- lbs.
• Good Loader

1999 Pioneer 5×16 Screening Plant - $69,500

• 3-Deck Twin Screening Plant
• (2) 40hp Electric Motors
• TA Trailer-Mount
• (3) 36″x10′ Cross Conveyors;

1999 PRENTICE 410E LOG LOADER - $39,500

• Prentice Grapple
• Live Heel
• Cummins Power
• Joy Sticks
• Working Unit
• Truck Not Included

2001 CUMMINS/ONAN DQKC 2000KW - $165,000

• Cummins QSK60-GS 16 Cylinder Engine
• 277/480 Volt
• 2,500 Gallon Base Fuel Tank
• Sound Attenuated Enclosure
• 7,100 Hours
• Very good unit.  Dealer maintained from new.
• FOB Your Truck

2002 TEREX TH1056C - $26,000

• 10,000 Lb.
• 56′ Reach
• 60″ Forks
• 14:00×24 Foam-Filled Tires
• Deere Diesel
• Outriggers
• 4 Wheel Drive
• 4 Wheel Steer
• 3,237 Hours
• Approximate Weight is 31,200 lbs.
• Very Good Condition

2003 GRADALL 534D10-45 - $22,500

• 10,000 lb. Lift
• 45′ Reach
• 4×4
• Cummins Power
• Outriggers
• 14×24 Foam-Filled Tires
• QC Forks
• Heater
• Approximate Weight 27,930 lbs.
• 3,015 Hours
• Very Good Lift

2004 Dakota Fabricating 36″ x 20′ Conveyor - $6,500

• 36″ x 20′
• Self-Supporting Feed
• Very Good Condition

2004 LINK-BELT 160LX - Call

• Hydraulic Thumb
• Good Condition

2005 CAT D6N XL - $115,000

• 6-Way Dozer
• Cab
• AC
• Ripper
• Good Undercarriage
• 6,749 hours

2005 HITACHI ZX200LC - $79,500

• Towtem Clamshell Bucket
• Esco Hydraulic QC
• Cab
• AC
• Extra Hydraulics
• 4,520 Hours
• Very Good Condition

2005 TEREX TXC225LC-1 - $70,000

• 32″ Pads
• Hydraulic Thumb
• 42″ Bucket
• AC/Heat
• Radio
• Approximately 49,000 lbs.

2007 KOBELCO SK290LC - $99,500

• Hydraulic QC
• 36″ Bucket
• 32″ Pads
• Mitsubishi Engine
• Approximately 67,000 lbs.
• 2,005 Hours
• Very Nice Low-Hour Machine

2007 KOMATSU WB146-5 - $49,500

• 24″ Bucket
• 4n1 Front Bucket
• Wainroy Coupler
• Extendahoe
• 19.5×24/14×17.5 Tires
• Only 143 Hours
• Like New!

24″ Bucket for JD/Hitachi for 300/330 - $5,000

• New Teeth
• Very Good Condition

25″ Compaction Wheel for 200-Size Machine - $500

• Smooth Drum
• Pinned for 200-Size Machine
• Fair Condition

27″ PSM CLAMSHELL BUCKET - $6,500

• Full Rotation
• 84″ Opening
• 27″ Wide
• For 120/150-Size Machine

28″ BUCKET FOR CAT 225 - $500

• Good Condition

32″ TOWTEM CLAMSHELL BUCKET - $12,500

• 95″ Opening
• 32″ Wide
• Full Rotation
• w/Pins for 200-Size Machine

35″ Bucket for CAT 320/322 - Call

• Excellent Condition

36″ WAINROY TILTING BUCKET FOR CAT 325 - $1,000

• Balderson Hydraulic Thumb

40″ Bucket w/Shamrock Thumb for Case 170B - $2,000

• Pin for Case 170B or ?
• Good Condition

48″ CP BUCKET FOR KOMATSU PC400 - $5,500

• Pins for Komatsu PC400
• 2.38 Yard
• Hensley Teeth
• Very Good Condition

48″ WB BUCKET FOR KOBELCO SK250 - $3,000

• Near New Condition
• 5 Teeth
• Heavy Duty

66″ CP BUCKET FOR KOMATSU PC400 - $6,500

• Heavy Duty
• Pins for Komatsu PC400
• Hensley Teeth
• 3.3 Yard
• Very Good Condition

96″ GP BUCKET FOR CAT 930 - $2,500

• 8′ Wide
• Smooth Edge
• Approximately 2 Yard
• 1 3/4″ Pins
• Good Condition

96″ HENSLEY BUCKET for CAT 375 - $13,500

• H Linkage
• 7.68 Cubic Yards
• Very Good Condition

AUSTIN-WESTERN PACER 300 - $9,500

• 6 WD
• 1967 +/-
• Detroit 4-cyl Diesel
• Scarifier
• 12″ MB
• Cab
• Lights
• 1400 x 24 Tires
• Former Government Unit
• Low Hours
• Front Snow Plow Available…Call

AUSTIN-WESTERN PACER 300 - $9,500

• 4 WD
• 2-axle
• Detroit 4-cyl Diesel
• 4-wheel steering
• 12′ MB
• Cab and Lights
• Former Government Unit
• Low Hours
• Good Condition
• Choice of 2
• Front Snow Plow Available…Call

Balderson B170 Hammer - Call

• 6,000 lb. Rammax Hammer
• Fits CAT 375

Boom and Stick for Komatsu PC200 - $4,000

BRUSH RAKE FOR CAT D6 - $3,500

• Approximately 9′ 1″ wide.
• Tines are 15″ apart.
• Removed from a CAT D6

BTI SHEAR - $66,000

• Second Member
• For 330-Size and Up Carriers
• 1,600 Hours

CAT 545kw GENSET - $29,500

• 1983 +/-
• 3412 Power
• 545 kw
• 755 hp.
• Updated Control Panel
• Mounted in 24′ Van
• 600 +/- Gallon Fuel Supply
• Approximately 9,000 Hours
• This is a daily runner.  Good Unit.

CAT 966C TIRE & WHEEL - $500

CAT THUMB BODY FOR 320C/322C/325C - $3,000

• No Tips!
• Includes Cyclinder and Brackets

Center-Mount Scarifier - $2,000

• For all Champion/Volvo Graders
• New in Box!  Never Used!

Chip/Light Materials Bucket from Clark 175 - $3,000

• Good Condition

Compaction Wheel for 300-Size Machine - $2,500

• Smooth Drum
• Pinned for 300-Size Machine
• Good Condition

CTR 314SCD DELIMBER - Call

• Diesel Powered
• Radio Controlled

Cummins 6BT - $1,500

• 460C
• 5.9 Liter
• 150 hp
• Running Takeout
• 1992 +/-

CUSTOM BUILT BRUSH RAKE for CAT D4E/D4H - $2,500

• 8′ wide

DANZCO PT20 PULL-THRU DELIMBER - $10,500

• Yanmar Diesel

Felco 10-20 STD Bedding Conveyor - $9,000

• 6′ Extension of 22″ Belt
• Approximately 1′ Extension on Hopper
• Vibrator
• Approximately 31′ Length Overall
• Looks Very Good

FELCO CONVEYOR - $5,000

• 96″ x 54″ Hopper
• 24″ Belt
• 25′ 6″ Overall Length

Goodyear Tire - $1,250

• 28 Ply
• 29.5 x 25

GROVE MZ116B - $21,000

• 4 x4
• 110′ Reach
• Gas Engine
• Daily Worker

INGERSOLL RAND G600 GENERATOR - $57,000

• 3-Axle
• Towable
• Pintle Hitch
• 661 hp Volvo Engine
• 467 kw Generator
• TIER II
• 2,600 hours
• Good Condition

JD 750B - Call

• Straight Blade w/Tilt
• Rear Draw Bar
• Excellent Undercarriage
• Runs & Works
• Shows 6,244 Hours

Kolberg 2D488 - $29,500

• Near new 4 x 8 Kolberg 2-deck wet screen
• Goldfield Trommel
• 45-50 yph

LeTourneau Log Stacker/Pipe Handlers - Call

• 60-Ton Capacity
• 4 x 4
• 12.7 liter Detroit Series 60
• Excellent Tires
• Very Clean
• Good History
• Just Off Major Pipeline Job

LOG FORKS FOR CAT 966C - $2,000

• Double Top Clamp

MEDFORD FORKS FOR KOMATSU WA450 - $3,000

• From Komatsu WA450
• Good Condition

More Pictures of 1990 CAT 966E

PACKER 750 PORTABLE GRINDER - Call

• Diesel Power

PETTIBONE 8042 - $11,500

• 8,000 lb. Lift
• 42′ Reach
• 4×4x4
• Outriggers
• Cummins Power
• 13:00R x 24 Tires
• Daily Worker

PETTIBONE SUPER 20 - $12,000

• Long Forks
• Fork Positioner
• Cummins
• Very Good Tires
• Very good unit

PSM Thumb for Cat 315 - $3,000

• NEW!

VAC-TRON PMD-500GT - $14,500

• High Pressure Sewer Cleaner
• 25 hp Kohler
• 225 Gallon Water Tank
• 2-Axle Trailer w/Electric Brakes
• Runs & Works Well

Volvo L220E Bucket - $7,500

• w/Teeth
• Includes 3X Pins
• Good Condition

VOLVO QC FORKS FOR VOLVO L70/L90 - $2,500

Volvo Ripper - $9,500

• Fits All B-Model Graders

YOUNG BRUSH RAKE FOR D7-SIZE - $3,500

• Removed from CAT D7E
• Approximately 9′ wide and 6′ tall
• (8) 29″ Teeth
• Good heavy duty rake

Young Grapple and Boom - $2,500

• From CAT D6H/D6R?